Toxicological screening of human plasma by on‐line SPE‐HPLC‐DAD: identification and quantification of acidic and neutral drugs

A multi‐analyte screening method for the quantification of 50 acidic/neutral drugs in human plasma based on on‐line solid‐phase extraction (SPE)–HPLC with photodiode array detection (DAD) was developed, validated and applied for clinical investigation. Acetone and methanol for protein precipitation, three different SPE materials (two electro‐neutral, one strong anion‐exchange, one weak cation‐exchange) for on‐line extraction, five HPLC‐columns [one C₁₈ (GeminiNX), two phenyl‐hexyl (Gemini C₆‐Phenyl, Kinetex Phenyl‐Hexyl) and two pentafluorophenyl (LunaPFP(2), KinetexPFP)] for analytical separation were tested. For sample pre‐treatment, acetone in the ratio 1:2 (plasma:acetone) showed a better baseline and fewer matrix peaks in the chromatogram than methanol. Only the strong anion‐exchanger SPE cartridge (StrataX‐A, pH 6) allowed the extraction of salicylic acid. Analytical separation was carried out on a Gemini C₆‐Phenyl column (150 × 4.6 mm, 3 µm) using gradient elution with acetonitrile–water 90:10 (v/v) and phosphate buffer (pH 2.3). Linear calibration curves with correlation coefficients r ≥ 0.9950/0.9910 were obtained for 46/four analytes. Additionally, this method allows the quantification of 23 analytes for therapeutic drug monitoring. Limits of quantitation ranged from 0.1 (amobarbital) to 23 mg/L (salicylic acid). Inter‐/intra‐day precisions of quality control samples (low/high) were better than 13% and accuracy (bias) ranged from ?14 to 10%. A computer‐assisted database was created for automated detection of 223 analytes of toxicological interests. Four cases of multi‐drug intoxications are presented. Copyright © 2015 John Wiley & Sons, Ltd.     

Accuracy and CPU time of JE-TLM,PLRC-TLM and CRC-TLM methods for plasma medium

The current density (JE), the piecewise linear recursive convolution (PLRC) and the constant convolution recursive (CRC) techniques are developed and integrated into the transmission line matrix (TLM) algorithm. A comparison of these three schemes according to the criteria of accuracy and CPU time is presented. Numerical experiments show that JE provides the most accurate solution and requires the least CPU time; PLRC is nearly as accurate but consumes more CPU time than CRC.     

变频控制直接膨胀式太阳能热泵的数值模拟

文中通过对变频控制直接膨胀式太阳能热泵的数值模拟,指出PV/T- SAHP系统实现变频控制从而解决太阳能热泵集热器面积与压缩机的容量不匹配的关键问题是找到系统集热/蒸发器的MSS线.为变工况下太阳能热泵系统的研究提供参考.     

Application of a line implicit method to fully coupled system of equations for turbulent flow problems

For unstructured finite volume methods, we present a line implicit Runge–Kutta method applied as smoother in an agglomerated multigrid algorithm to significantly improve the reliability and convergence rate to approximate steady-state solutions of the Reynolds-averaged Navier–Stokes equations. To describe turbulence, we consider a one-equation Spalart–Allmaras turbulence model. The line implicit Runge–Kutta method extends a basic explicit Runge–Kutta method by a preconditioner given by an approximate derivative of the residual function. The approximate derivative is only constructed along predetermined lines which resolve anisotropies in the given grid. Therefore, the method is a canonical generalisation of point implicit methods. Numerical examples demonstrate the improvements of the line implicit Runge–Kutta when compared with explicit Runge–Kutta methods accelerated with local time stepping.     

Macromodeling of high-speed interconnects by positive interpolation of vertical segments

In this paper a novel macromodeling scheme is presented to model the per unit of length (p.u.l.) parameters of uniform transmission lines. In particular, it is focused on single on-chip interconnects, because their p.u.l. parameters are influenced by the presence of semiconductor (s) and as such exhibit a strong frequency-dependency, making the modeling process harder. Starting from a set of very accurate tabulated data samples, obtained by two-dimensional electromagnetic modeling, rational models for the four p.u.l. parameters are constructed. The novelty of the approach lies in the fact that the rational models are positive by construction and that a controllable accuracy is obtained. These models can then further be used to construct multivariate models, e.g., for variability analysis. Here, the novel scheme is applied to an on-chip inverted embedded microstrip line, of which the signal integrity behavior is assessed in both the frequency and the time domain, demonstrating the applicability of the macromodels.     

基于智能数据采集器的研究与实现

针对目前各行业数字化、智能化产品应用日趋广泛，数据的获取、传输、分析、应用尤为重要，如何避免采集设备接口单一、功能固定、实用性差等缺点，提出采用ARM嵌入式工控模块M9080-N20为基础，采用VK3266串口芯片扩展UART串行接口，提出基于73K222AU调制解调器、HR219307变压器实现采集器二线模拟通信，并支持以太网、CAN总线和UART串行通信，可以有效解决数据远程采集、传输和控制，适用于特殊环境设备故障检测、诊断和抢修。实验结果证明，智能数据采集器不仅具有多种型号设备故障诊断功能；还能实现野外快速通信组网，不同类型设备数据远程采集、传输、分析和控制功能，在军民融合产品上具有广阔的应用前景和实用价值。     

A Novel Approach to All-Optical Generation of Ultra-Wideband Signals

Abstract

The generation of ultra-wideband signals in the optical domain is highly desirable for ultra-wideband-over-fiber systems, which has recently become a topic of interest. In this article, a novel and simple approach to achieve all-optical generation of ultra-wideband signals is proposed, which is based on delaying and superimposing optical Gaussian pulses with opposite polarities. The proposed system is capable of generating both ultra-wideband monocycle and doublet pulses, and the polarity of the generated ultra-wideband monocycle pulses can be fast-switched to implement pulse polarity modulation with the required bit pattern. A model to describe the proposed system is developed, and the generation of ultra-wideband signals is demonstrated with simulations and a proof-of-concept experiment.     

Comment on ‘Ab initio study: the potential energy curves and rovibrational spectrum of low-lying excited states of HCl+ cation’ (Molecular Physics, 114:19, 2817–2823)

In a recent article, Y. Liu, X. Cheng, H. Cheng, J. Cheng and X. Song [Mol. Phys., 114:19, 2817–2823] report on the calculation of potential energy curves and the derivation of spectroscopic constants and line intensities for the lowest energy electronic states of HCl⁺. There are several shortcomings in the article; the most notable being the incorrect ordering of the ²П_3/2 and ²П_1/2 state energies, erroneous selection rules, which lead to the absence of a Q-branch in their predicted spectra, incorrect Höln–London factors, and a missing appendix.     

A model of product line design and introduction sequence with reservation utility

Cannibalization is a major concern for a firm when designing a product line. In addition, external options from outside the firm’s product line may also play a significant role. In this paper, we investigate the impact of external options, represented by reservation utility, on product line design and introduction sequence. We find that: (a) heterogeneous reservation utility defines the relative attractiveness of segments and corresponding product line; (b) reservation utility makes it more favorable to introduce products sequentially rather than simultaneously; (c) aggregating segments is an effective way to mitigate cannibalization when it becomes too difficult to manage with different values of reservation utility across multiple segments; and (d) introducing products in a non-monotone order of quality can improve profit from simultaneous introduction when the value of reservation utility of a middle segment is particularly high.     

Cousin I condition and Stein spaces

Here we give a few n-dimensional extensions of a recent result of M. Abe concerning a Cousin I characterization of two-dimensional Stein manifolds.